 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Document 185-1 Maxi SpringTM Air Core Inductors * Air core inductors feature higher Q, L and current ratings * Rigid package provides a flat surface for pick and place * Leads are locked in position for precise terminal spacing Weight 0.42 - 0.59 g Terminations RoHS compliant tin-silver over copper. Other terminations available at additional cost. Ambient temperature -40C to +125C with Irms current, +125C to +140C with derated current Storage temperature Component: -40C to +140C. Packaging: -40C to +80C Resistance to soldering heat Max three 40 second reflows at +260C, parts cooled to room temperature between cycles Temperature Coefficient of Inductance (TCL) +5 to +70 ppm/C Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30C / 85% relative humidity) Failures in Time (FIT) / Mean Time Between Failures (MTBF) One per billion hours / one billion hours, calculated per Telcordia SR-332 Packaging 800/13 reel Plastic tape: 24 mm wide, 0.3 mm thick, 12 mm pocket spacing, 6.1 mm pocket depth PCB washing Only pure water or alcohol recommended Part number1 132-09SM_L_ 132-10SM_L_ 132-11SM_L_ 132-12SM_L_ 132-13SM_L_ 132-14SM_L_ 132-15SM_L_ 132-16SM_L_ 132-17SM_L_ 132-18SM_L_ 132-19SM_L_ 132-20SM_L_ Turns 9 10 11 12 13 14 15 16 17 18 19 20 Inductance2 (nH) 90 111 130 169 206 222 246 307 380 422 491 538 Percent tolerance3 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 Q2 typ 114 104 104 114 114 110 114 114 114 114 114 104 Q2 min 95 87 87 95 95 92 95 95 95 95 95 87 Test freq. (MHz) 50 50 50 50 50 50 50 50 50 50 50 50 SRF min4 (GHz) 1.140 1.020 0.900 0.875 0.800 0.730 0.685 0.660 0.590 0.540 0.535 0.490 DCR max5 (mOhm) 15 15 20 25 30 35 35 35 50 60 65 90 Irms6 (A) 3.5 3.5 3.0 3.0 3.0 3.0 3.0 3.0 2.5 2.5 2.0 2.0 1. When ordering, specify tolerance, termination and packaging codes: 132-20SMGLD Termination: L = RoHS compliant tin-silver (96.5/3.5) over copper. Special order: T = RoHS tin-silver-copper (95.5/4/0.5) or S = non-RoHS tin-lead (63/37). Tolerance: G = 2% J = 5% Packaging: D = 13 machine-ready reel. EIA-481 embossed plastic tape (800 parts per full reel). B = Less than full reel. In tape, but not machine-ready. To have a leader and trailer added ($25 charge), use code letter D instead. 2. Inductance and Q tested on the Agilent/HP 4291A with the 16193 fixture and correlation. 3. Tolerances in bold are stocked for immediate shipment. 4. SRF tested on the Agilent/HP 8753D and the SMD-D test fixture. 5. DCR tested on the Cambridge Technology Model 510 Micro Ohmmeter. 6. Current that causes a 15C temperature rise from 25C ambient. 7. Electrical specifications at 25C. See Qualification Standards section for environmental and test data. Refer to Doc 362 "Soldering Surface Mount Components" before soldering. Specifications subject to change without notice. Please check our website for latest information. Document 185-1 Revised 10/29/08 (c) Coilcraft, Inc. 2009 Document 185-2 Designer's Kit C319 contains 8 each of all 5% values. Designer's Kit C319-2 contains 8 each of all 2% values. Maxi SpringTM Air Core Inductors Typical L vs Frequency 1000 900 800 200 250 Typical Q vs Frequency Inductance (nH) 700 600 500 400 300 200 100 0 1 10 100 422 nH Q factor 150 90 nH 169 nH 246 nH 422 nH 100 246 nH 169 nH 90 nH 50 0 1000 1 10 100 1000 Frequency (MHz) Frequency (MHz) Typical Irms Derating 120 110 100 Percent of rated Irms 90 80 70 60 50 40 30 20 10 0 -40 -20 0 20 40 60 80 100 120 140 Ambient temperature (C) 25C A D E Recommended Land Pattern Strip Length 0.095 2,42 0.080 2,04 0.185 4,70 C B A max 0.415 10,55 B max 0.260 6,60 C max 0.235 5,97 D 0.226 0.003 5,74 0,08 E 0.314 0.020 7,98 0,51 135 max 0.314 7,98 0 min Dimensions are in inches mm Specifications subject to change without notice. Please check our website for latest information. Document 185-2 Revised 10/29/08 (c) Coilcraft, Inc. 2009 |
Price & Availability of 132-17SM-L
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |